DBXL dbxl pinion options ?

[8000ft]

I just picked up a a used DBXL and am wondering if there are any pinion options.
I live at 9000ft elevation and the 20 tooth stocker is a bit to high, I would like to try an 18T but I can not find any options out there.

 

[RcJunkie13]

a dbxl e or gas?

 

[spents]

if its gas, then try dgi racing, they do a range of spur and pinions for the dbxl

 

[Seandonato73]

Or changes over to the vertigo hex bell and get their gears. I think 18 or 19 is actually stock. I ran a 20 with a zen g320. Don't know what is stock on the 2.0 if that's what you grabbed.

 

[8000ft]

i just assumed that 20 was stock because that is what was on it when i purchased it. i will check out dgi , thanks
no luck at dgi.............

 

[spents]

i just assumed that 20 was stock because that is what was on it when i purchased it. i will check out dgi , thanks
no luck at dgi.............

just had a look around myself mate,
dgi are all larger than 20t, same with atop gears which are essentially dgi anyways,
and 30 degree north seem to start at 20t as well,
can only see 22t and 23t vertigo pinions listed for the dbxl, but you'd need the vertigo hex bell as @Seandonato73 said above,
there must be something out there that smaller than the 20t though,

 

[Dcon]

I went cheap an bought these five pinions to run on my electric 30DN DTT-7. 16t-20T. They seem to be working great thus far. https://www.amazon.com/gp/product/B09GL5156T/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1