deeside any one

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
I mite try a place me m8 rogers told me about (rcdemon) called glossop sands , from wat i can gather its a resovoir (drained at the moment) with some sweet lookin sand banks an natural terrain ! he put some piks on http://www.baja-forum.co.uk/
other than that im gona go back to crosby (alias the sand bowls chk above link for piks)
im finding deeside a bit harsh on the rcs !!!!
plus i fancy a change:D
found sum piks,,

attachment.php

attachment.php


ps ,,theres notin like bashin on crisp sand :D
just get yerself outerweared UP !!!!!!!!!
an alls fine;)
 
Last edited:
mack said:
I mite try a place me m8 rogers told me about (rcdemon) called glossop sands , from wat i can gather its a resovoir (drained at the moment) with some sweet lookin sand banks an natural terrain ! he put some piks on http://www.baja-forum.co.uk/
other than that im gona go back to crosby (alias the sand bowls chk above link for piks)
im finding deeside a bit harsh on the rcs !!!!
plus i fancy a change:D
found sum piks,,

attachment.php

attachment.php


ps ,,theres notin like bashin on crisp sand :D
just get yerself outerweared UP !!!!!!!!!
an alls fine;)
Click to expand...


That 'T' will stand up to anything!
 
lol (the T,S gettin tuffer as we spk,,)

but im gettin a bit bored with d,side,,
plus its always a winner goin out to new bash spotzzz ...
 
Deeside was great.
A few glitches with my bog standard E-Maxx (yeah, right!!). Must have gone through 30-35mph on half throttle, then I accelerated and it wheelied AGAIN!
For those interested, it's got a Fast Lane Machine alloy chassis, Integy 'titanium' skid plates and bumpers, Integy MSR8 alloy shocks, all of the drivetrain is SuperMaxx, an Integy wheelie bar, Flextek REAL titanium arms (I say that as I had 'a slight glitch' and ended up skidding 40 yards on the roof!! and the 'titanium' Integy bumper bent. It's now straightened 'with a little persuasion'!!
It runs 6S LiPo - 2 x 3S in series with a Feigao 580L ..... not only Large Scale costs $$$

My Losi LST2 with Raminator body and wheels had a serious engine leak - now solved 100%. This went great everywhere before the - cured now - engine problem. I even made 'the jump' with it, but nothing too adventurous!!

The FG MT had binding front hydros - solved with longer mounting screws and Nylok nuts to straighten the calipers - that was expensive!!!
Suspension was way too stiff so couldn't 'play' in the sand pit too much.

The REAL GANG were going wild on the 'grass' blasting up and down non-stop - great effort guys. I was well impressed!!!
I'm a little concerned the 'start line' is a little obvious!!

THE CHALLENGE IS ON FOR NEXT TIME. One of the 'crew' reckons he can jump the (full size shipping) container to one side of the normal area .... mmmmmmmmmmmmhhhhhhhhhhhhhhh :w00t::w00t::w00t:
Pete, THIS ONE IS YOURS MATE !!!!! :w00t::w00t::D:D:lol::lol::lol::D:D:w00t::w00t:
Al.
 
A few glitches with my bog standard E-Maxx (yeah, right!!). Must have gone through 30-35mph on half throttle, then I accelerated and it wheelied AGAIN!
For those interested, it's got a Fast Lane Machine alloy chassis, Integy 'titanium' skid plates and bumpers, Integy MSR8 alloy shocks, all of the drivetrain is SuperMaxx, an Integy wheelie bar, Flextek REAL titanium arms (I say that as I had 'a slight glitch' and ended up skidding 40 yards on the roof!! and the 'titanium' Integy bumper bent. It's now straightened 'with a little persuasion'!!
It runs 6S LiPo - 2 x 3S in series with a Feigao 580L ..... not only Large Scale costs $$$
Click to expand...
That thing was rapid Al, PaulB has got the vid of your roof slide, i could see the blood drain from your face as it up-ended and slid to a halt. :censored::oops::scared::eek::crying:

You've some nice looking cars Al thats for sure, i can only wish for the quality of yours. :w00t:
 
Thanks, but not much quality if it's sliding on it's roof for that distance!!
It's now 2.4GHz, so MIGHT be sorted.
I think it's the long gearing - wasn't over-geared but sensorless are crap at low revs.
I forgot to mention I'd left it in high gear - not interesting in low!!
Bring on Sunday!!

Al.

PS Pete's on for 'the jump' he reckons !!
 
atom3624 said:
Deeside was great.
A few glitches with my bog standard E-Maxx (yeah, right!!). Must have gone through 30-35mph on half throttle, then I accelerated and it wheelied AGAIN!
For those interested, it's got a Fast Lane Machine alloy chassis, Integy 'titanium' skid plates and bumpers, Integy MSR8 alloy shocks, all of the drivetrain is SuperMaxx, an Integy wheelie bar, Flextek REAL titanium arms (I say that as I had 'a slight glitch' and ended up skidding 40 yards on the roof!! and the 'titanium' Integy bumper bent. It's now straightened 'with a little persuasion'!!
It runs 6S LiPo - 2 x 3S in series with a Feigao 580L ..... not only Large Scale costs $$$

My Losi LST2 with Raminator body and wheels had a serious engine leak - now solved 100%. This went great everywhere before the - cured now - engine problem. I even made 'the jump' with it, but nothing too adventurous!!

The FG MT had binding front hydros - solved with longer mounting screws and Nylok nuts to straighten the calipers - that was expensive!!!
Suspension was way too stiff so couldn't 'play' in the sand pit too much.

The REAL GANG were going wild on the 'grass' blasting up and down non-stop - great effort guys. I was well impressed!!!
I'm a little concerned the 'start line' is a little obvious!!

THE CHALLENGE IS ON FOR NEXT TIME. One of the 'crew' reckons he can jump the (full size shipping) container to one side of the normal area .... mmmmmmmmmmmmhhhhhhhhhhhhhhh :w00t::w00t::w00t:
Pete, THIS ONE IS YOURS MATE !!!!! :w00t::w00t::D:D:lol::lol::lol::D:D:w00t::w00t:
Al.
Click to expand...

OK...... Fill me in on the container jump !! Who made the claim ??!!:w00t::lol:

Which direction ?? How is the launch planned ??

I need details !!!!!!!!!!!:lol::w00t::D
 
guy's the container jump cant happen this sunday, im not there this sunday to film the damage...:w00t:

and guess what guy's ive got my hostiles:) i have finally got grip....
 
How can you buy hostiles, and NOT be available? !!
Cancel the wedding, or whatever it is !!

Yeah, I liked the slow motion! I can see how the wheel on the wheelie bar got stuffed! More high quality from Integy!

I'm a bit concerned at the exposed paving stone at the start / finish line .... needs a little more sand and grass .. !!!
 
Back
Top