deeside mega bash,

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
michaellfc95 said:
jut seen anothor pic of the car after the builden jumped out and i think iv bent the chassie to the right can any one tell me if i have


picture.php



thanks
mike
Click to expand...

Looks like it to me :(. The way its kicked over I wouldnt be surprised if it showing signs of cracking across where the fixing holes for the suspension are. You need to make a piece to reinforce it like some of the other guys have. You may have got lucky though and the bolts have bent across. The way it has bent you would have expected the other wheel to have come off unless it was going backwards!!
 
michaellfc95 said:
jut seen anothor pic of the car after the builden jumped out and i think iv bent the chassie to the right can any one tell me if i have


picture.php



thanks
mike
Click to expand...

it could be but strip the front end down to have a good look, mine bent up not sideways so i fixed it with a 27oz s,wing hammer, to be honest baja chassis are strong at the rear end but were it matters at the front they are weak as f??k i seen voo,s 2nd chassis bend with a very minor bump,
 
pablo said:
it could be but strip the front end down to have a good look, mine bent up not sideways so i fixed it with a 27oz s,wing hammer, to be honest baja chassis are strong at the rear end but were it matters at the front they are weak as f??k i seen voo,s 2nd chassis bend with a very minor bump,
Click to expand...

just triped the front end it has bent about 3 mill up and about 2 mill to the right i have got a front chassie brace but it hiit the building at about 1/2 throttle so the brace didnt do anythink just wondering what the damage would of bin with out the brace im getina a new stronger one made out of stronger matel in my dads work
mike :(
 
michaellfc95 said:
just triped the front end it has bent about 3 mill up and about 2 mill to the right i have got a front chassie brace but it hiit the building at about 1/2 throttle so the brace didnt do anythink just wondering what the damage would of bin with out the brace im getina a new stronger one made out of stronger matel in my dads work
mike :(
Click to expand...

get the hammer to it ,that brace of yours is solid you made it from steel .
 
i no mate im gona make another one maybe thicker steal
shuld i do it or get my dads mate in work to bent it stright hes a metal worker
or should i just go to the loft and start hitting it with the hammer ?
hope paul has got it on vid the camra was in that direction
mike
 
michaellfc95 said:
i no mate im gona make another one maybe thicker steal
shuld i do it or get my dads mate in work to bent it stright hes a metal worker
or should i just go to the loft and start hitting it with the hammer ?
hope paul has got it on vid the camra was in that direction
mike
Click to expand...

If its stretched the ally on 1 side at the weak point (at the holes) like Voo's pic its fooked mate. You can beat it to death but you wont get anywhere. A bend along the length or width you could get straight again but when its stretched the metal like that mate its a write off. Make sure you inform your insurance........honest guv the building jump out at me just like that rock did to dwarfy :lol::lol:
 
dwarfy said:
If its stretched the ally on 1 side at the weak point (at the holes) like Voo's pic its fooked mate. You can beat it to death but you wont get anywhere. A bend along the length or width you could get straight again but when its stretched the metal like that mate its a write off. Make sure you inform your insurance........honest guv the building jump out at me just like that rock did to dwarfy :lol::lol:
Click to expand...

it hasnt streched just one side is higher than the other side by about 3 mill
mike
 
Another top notch vid from Mister Paul (s)Bielberg !!

Just love the slo-mo's of Ginges 5T goin over, and Mikes jumps.... WICKED !!

And the music is IMMENSE mate !:w00t::D Takes me back to my Cream and Gatecrasher days !:rolleyes: ......I Really love you man ! ........your the best !!!!!!!!!!!!

:D:lol::D:lol:
 
Back
Top