diff cup

[andyken]

More confused as ever now. Which diff cups do I get? 07145 or 710021?And which part number for the dog bone?

Both will fit, the 710021 is a "upgrade"...?

 

[vpalace]

Ok thank you.

 

[NUNCHUCKSKILZ]

Just go FLM and be done!.. Also switch to Nutech Shocks from a TB2 with HPI Springs. Play with Oils wt's and and change your hole count on the pistons. Trust me, when you find the right combo you will wonder what car you are driving. The XB set up right is a track killer.

 

[vpalace]

I appreciate the input bit I'm not remotely interested in racing or anything like that. I do donuts on a baseball field and jump an occasional hill.

 

[Sergio1]

Just go FLM and be done!.. Also switch to Nutech Shocks from a TB2 with HPI Springs. Play with Oils wt's and and change your hole count on the pistons. Trust me, when you find the right combo you will wonder what car you are driving. The XB set up right is a track killer.

Im interested in the shocks got a link?

 

[vpalace]

Quick question, I cleaned out all the crappy old oil in my rear diff. How much of the new oil do I put in?

 

[Guest]

At least enough to bury the gears. I like mine pretty full.

 

[vpalace]

Sounds good. Any tips about that I ring I sent you a message about? I cleaned everything and it pops out. I spread some old oil on it and it stays, but once the diff cup moves, it turns with it and sort of buldges. Doesn't look likenit would be a problem, but I don't feel like tearing this apart again.

 

[Guest]

I don't recall having any difficulties with the orings. Do yours look ok?

 

[Sergio1]

Sounds good. Any tips about that I ring I sent you a message about? I cleaned everything and it pops out. I spread some old oil on it and it stays, but once the diff cup moves, it turns with it and sort of buldges. Doesn't look likenit would be a problem, but I don't feel like tearing this apart again.

I had the same problem i had some spares so i replaced mine.

 

[vpalace]

They look fine. No rips or years or odd shape. Do you know the size? Maybe I can just try to pick one up tomorrow.

 

[andyken]

Just go FLM and be done!.. Also switch to Nutech Shocks from a TB2 with HPI Springs. Play with Oils wt's and and change your hole count on the pistons. Trust me, when you find the right combo you will wonder what car you are driving. The XB set up right is a track killer.

Any link ?

I just busted ANOTHER drive cup...

 

[andyken]

tried looking up FLM ...no luck on redcat stuff?

 

[Sergio1]

http://www.fastlanemachine.net/products.php?cat=Redcat+XB

Is this what You want

 

[andyken]

http://www.fastlanemachine.net/products.php?cat=Redcat+XB Is this what You want

I think so, I asked if there is more options?

I think the ones on the site are 10mm...I have 6mm and ramtech hubs.

 

[Sergio1]

Well i think that is The best there is

 

[andyken]

Well i think that is The best there is

thank you!

 

[andyken]

looking to buy...any dealers for the flm cups?

 

[redthomas]

You can also just shut 1/2 inch long pieces of copper tubing and slide it over the cup..that'll stregnthen the cup and not let it bust apart

 

[andyken]

You can also just shut 1/2 inch long pieces of copper tubing and slide it over the cup..that'll stregnthen the cup and not let it bust apart

Did that, now they are snapping where the pin goes thru...