DriveShaft Pins

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
M

MJPracing1

Junior Member
Messages
20
Reaction score
0
Location
SoCal
Question here on drive shaft pins. The pin in my driveshaft shot right out. Just wondering before I go and buy some new driveshafts,does anyone sell just the pins???
 
Go to a hardware store, tractor supply company something of that nature and ask for a trailer hitch pin clip. It looks like a huge body clip, they are like $1 each and 1 should be enough to do all 4 corners. Just got my clip yesterday to fix one of mine that my ONB 29cc broke :D


Also forgot to mention that is for the CVDs. Im fairly sure the dogbone pins are the same size.
 
the pin is a 5/32 drill bit if im not mistaking you could go that way little more pricy and you only use the smooth part of the bit, are the trailer hitch clip as obest44 said Ive have used both for dog bone pins and the wheel pins, ace harware has both
 
Hi just thought i would give you one up on the dogbones Ive bean reading about this it just so happens that i have a mate that has the rampage mt he was telling me about the pins popping out all the time so i told him to bring the ram round my house to check it over it just happens that i have the 1.4 scale fs dogbones that i ordered for a conversion test that i was working on


they seem to be the same length as the ram so taking a much closer look we found out that the 1.4 scale fs dogbones are much thicker and the pin holes are a touch smaller hence the pins in the dogbone will not come out they are wedged in there so tight man it was a git to get them out where as the ram pins just one tap and they shot out also when i was sizing them up it confirmed what i said in the first place the holes in the ram dogbones are a touch bigger than the fs ones so thought you would like to know


bloody hell that's like 6 times i mentioned dogbones including this to :rolleyes:
 
Back
Top