engine problems

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
V

Von

Junior Member
Messages
11
Reaction score
0
Location
Delaware
Hi everyone. I have a Redcat MT and just got a XB tonight. I got the MT used but its in like new condition. The seller was having trouble running it and decided gas is not for him. Well I'm having the same problem. It's a stock engine with a 990 carb. She just wouldn't start and seem to be flooding. So I switched back to the original carb that he sent with it. I like having a choke, especially in the cold. Still not having any luck plus it seems to have a LOT of compression. Nothing seems to be getting jammed but she's just hard to pull. Well I checked out my brand new XB today and she seems to have the same trouble turning over. Should I go with a Zenoah?
 
I don't even know why you would say that seeing that a cy and hy are just zen clones, you are not giving enough info about your problem, check plug see if you got spark , are you getting fuel?????????????????
 
She just wouldn't start and seem to be flooding.

Remove the spark plug, turn it up side down and pull it over a few times.

After clearing the motor out, reset stock carb settings .

Check for spark [carefully] :)

Prime the carb.

Choke is usually only needed to get a pop out of the motor.

Then try to start it . [no choke]

I like the 990 carb, but...

My 990 carb seems to start up only after a quick squirt of starting fluid...

No choke sucks, maybe the new manifold and velocity stack I got might help out.
 
Thanks for all the great advice. I'm new to 1/5 scale and I love the 4x4 with the Redcats. You guys are great and I really enjoy reading the forums.
 
What did you find out that was causing the issues that you were having with both rigs.Just wondering how it was solved incases somebody else has this problem.
 
Back
Top