engine upgrade help....

[Cloach]

Thanks in advance.....


I'm having engine overload. I'm looking at either getting a top half or a long block but there is a million different combinations and companies and not sure which to get. I'm looking for


more torque since I have a MT. I'm currently running stock 30.5. I would also like a little more top end but torque is primary.


I have the following upgrades.


-pipe


-aluminum fr spindles and fr and rear uprights


-aluminum roll cage


-813 carb


-DT1 (triple) filter with outerwear


I'm looking at possibly upgrading to a two speed as well to help out.


I'm a basher with a lot of nitro monster experience and like a hotter motor.


Once again, thank you!

 

[Silent_Chaos]

http://www.davesmotors.com/s.nl/it.A/id.1310/.f

With

http://www.davesmotors.com/cc288.html

And

http://www.davesmotors.com/zenoah-57795-3101-577953101-rc-stroker-crankshaft-30mm-2mm.html

With 8k spring and a lightened flywheel.

OR just go with the G320 zenoah released yesterday:

http://www.davesmotors.com/Zenoah-G320RC-Engine-Complete.html

Also, a cheap but powerful direct upgrade is the

http://www.davesmotors.com/esp-earth-surfer-ported-modified-30-5cc-big-bore-combo-kit-4-hp.html

 

[Silent_Chaos]

Those three above options are worth looking into. Specially the first option's 3 links combo. Its trevor simpson

 

[Cloach]

http://www.davesmotors.com/s.nl/it.A/id.1310/.fWith

http://www.davesmotors.com/cc288.html

And

http://www.davesmotors.com/zenoah-57795-3101-577953101-rc-stroker-crankshaft-30mm-2mm.html

With 8k spring and a lightened flywheel.

OR just go with the G320 zenoah released yesterday:

http://www.davesmotors.com/Zenoah-G320RC-Engine-Complete.html

Also, a cheap but powerful direct upgrade is the

http://www.davesmotors.com/esp-earth-surfer-ported-modified-30-5cc-big-bore-combo-kit-4-hp.html

Thanks Chaos! I'm kinda liking the 320. Maybe +2 crank when they are available.

 

[Silent_Chaos]

Thanks Chaos! I'm kinda liking the 320. Maybe +2 crank when they are available.

Yeah. I guess they're good.

Couple of months later, most of the guys like OBR and TS are gona start porting that too.

If you live in the US you can get that engine and send it to OBR. In the next coming months they're gona upgrade the hell out of that engine. Trust me.

 

[Silent_Chaos]

Note that, if you are into bigger engines and have the cash, you can always go for 50cc or even better 70cc.

They cost like 1500+ but worth looking into. 50cc just screams and always hungry for more throttle. You can spot the difference with the usual 8-9bhp engines vs the 50cc (bzm 50cc). Difference is huge since it's 15bhp

Check the vid, the 2nd white losi truck

However the 70cc has 18bhp

 

[Deluge1]

If you're looking to just reuse the crankcase, a ported cylinder kit is the way to go. You don't need a +2mm crank, the 30.5 already uses one.

I've ran this ESP kit, it has plenty of torque for the MT.

ESP Mod/ESP CHAMPIONSHIP PORTED GP290 36mm kit

This kit is from OBR, I haven't ran it but OBR is known for their porting.

Race Ported 2 Bolt 30.5cc Top End