FG Baja 2WD and DDM Dom Fitting

[ljw2k]

I have a FG Baja 2wd and wondered if anyone could give me some info on fitting the DDM Dom Top End Pipe will the man ( Stig ) have to be cut away and will i need to cut the roll cage at the front anywhere to make it fit.

Any Pictures would be benificial also of anyone who has already got one fitted.

Am i right in saying the front header pipe on the top end pipe is longer than the torque pipe ?

 

[MrUnlimited]

No, I thought the same. You have slightly cut away some of the drivers backseat for the manifold and you must cut awy some from the right rear. I'll post tomorrow some pics

 

[ljw2k]

Ok mate not the news i wanted to hear but if i have to run it with no shell it's going bloody on , if you can get any dimensions on how much need to be cut out the side that would be very helpful mate and appreciate it as the last thing i want to do is bodge my shell up.

 

[MrUnlimited]

Picture of the DDM dominator fitted:

 

[BrawnFG]

Mr U, what wing have you got on there, and how robust is it?

 

[MrUnlimited]

IT is a very good wing. It is made from ABS and indistructable. Gives more downforce to rear wheels. You can buy it through Elcon-models: http://www.elcon-models.com/products/allparts/18130spoiler

 

[dwarfy]

very nice mr U:cool2:

 

[ljw2k]

Ye and thanks for the pictures dude appreciated.