fg baja engine problem

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
L

Large Scale Basher

Reading the Rules!
Messages
294
Reaction score
0
Location
birmingham
Tried starting my fg baja today but i have had a stuggle i gave around 15 pull and it never started it i menshioned to flud the engine instead. i took the spart out and there was some fuel on the plug , i took some paper and placed it over the engine and i gave around 10 pulls and so much feul came on to the engine i repeated this process around 7 time and the same was happenin so much feul some coming on to the paper i have left the car for know, will try sTARTING it out tommrow :trout::trout:.

can someone help me what shell i do ??
 
I had the same problem with my bajs SS. First clean the plug with carb choke cleaner then plug it into the plug wire and ground it to the head, pull the starter a few times to make sure you have spark. Just don't hold it with your hand because you will get a shock that you will never forget, (you will only make this mistake once). If you have spark then put it back into the engine then take the air filter off and wash it out let it dry then install new filter oil put it back on then it should start right up. This process worked for me and I hope it will help you. Good Luck!
 
make sure the kill switch isnt stuck in from the last time you stopped the engine. You will pull for ever & nothing will happen. Or I would try a new plug. Just cos you get a spark doesn't mean its strong enough to fire the engine!
 
Make sure the model is clean before doing this.

Tip the model upside down, then pull it over 10-15 times. You need to remove the fuel from the bottom end or it will keep flooding itself.

Make sure you have spark and you should be good to go.
 
Back
Top