FG Leop. 2 front hubs bearings

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

easy

Well-Known Member
Messages
326
Location
Ontario Canada
Guys what is the easiest way to take the bearings out of the front hubs ?

I have the FG multi tool 8538 Can that remove bearings ??

There is an inside alloy insert as well that goes inside the inner bearing how to remove them ?


thanks guys
 
Easiest way is ... force ... or HEAT.
The alloy will expand and contract more/faster/both than the steel of the bearings, so you heat the lot - you can use an oven, or boiling water if you want, but ensure you dry, re-oil/grease the bearings again if you've boiled them - unless they're simply for throwing away.
Insertion is by lining up, flat piece of wood and a good hammer, or the reverse of above. HEAT.

Al.
 
Easy way I found is to use a allen key or 1/4 socket bar anything as long as it is slightly smaller than the hole and tap the bearing out from the inside, using little taps so it shouldn't damage the bearing.
 
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks