fg marder oversteer

[foxy]

took my marder out other day when going round corners it just spins out could this be a setting on my dx3 or the alloy shocks that i have just fitted all round:w00t:

 

[CroW]

No!!! It`s the Driver!! LOL

 

[voo2doo]

Lower the rear and higher the front shocks.Also you can toe-out by 2 degrees.
J

 

[renbar]

also what diff are you running mine used to spin alot but now ive changed my diff to adjustable its much better you say that you have just changed your shocks has it only started spinning since that

 

[foxy]

im running a alloy diff not adjustable one

 

[dwarfy]

At least its not rolling over in true marder stylee

 

[BrawnFG]

if you have a rear anti-roll bar, remove it.

 

[Trip]

At least its not rolling over in true marder stylee

Isn't that the truth! My MT never rolls, but the damn buggy turns turtle at every turn!

 

[pipeous]

set the rear camber a bit too. turn the wheel right say and push on the car to simulate going into a turn (weight shifts to the outside). set the rear camber so the tire is flat rather than an edge of the tire catching. do both sides like this. you will have a little camber showing when going straight but it will help keep the power down when turning

 

[Trip]

Good tip, Sir!