Fg monster truck advice ??

[Large Scale Basher]

Hi guy need some help if you can help thanks you :celebrate::celebrate:

Ive just had my monster truck out but once i give full throttle straight away it doesn't react straight away it sounds like its bogging and the other thing is are the front wheel meant to be slightly bent?? if you can help ill be great full!!

 

[dwarfy]

Might be an airleak from a bad gasket or over-rich settings on the carb. Whats it like at tick over? If its racing a bit its prob an air leak. Spray WD40 round the gaskets on the engine with it ticking over. If rpm drops then its a leak.

 

[Large Scale Basher]

Might be an airleak from a bad gasket or over-rich settings on the carb. Whats it like at tick over? If its racing a bit its prob an air leak. Spray WD40 round the gaskets on the engine with it ticking over. If rpm drops then its a leak.

with it started at idle its Ok to me looking at it sounds like its a bit lean what way shell i turn it to lean it out its not running that bad just bogging a bit... are the front wheel meant to be slightly bent??? thanks bud!!

 

[dwarfy]

What do you mean bent? Maybe some pics or a quick vid will help get the answers you need

 

[Bigger the Better]

Need a photo of your front set up. There may be an issue if they are bent up or down. If its in our out you can adjust that.
Try resetting oyu settings on the carb to factory and start over.
https://www.largescaleforums.com/showthread.php?t=2761

 

[Large Scale Basher]

Need a photo of your front set up. There may be an issue if they are bent up or down. If its in our out you can adjust that.
Try resetting oyu settings on the carb to factory and start over.
https://www.largescaleforums.com/showthread.php?t=2761

thanks big, it bent in and out not up or down and ill try and get the tuning sorted this weekend....:drool::drool::drool: