Fonzie engine mount question

[Barber213]

Does anyone know if the Fonzie motor mounts will work with the 30 degree north v2 chassis . Trying to get 20 tooth mounts on fearless for it . But o can’t find them . I’m only seeing 21 and 19.

 

[Flh003]

Yes they fit. They do stick below the chassis a bit. I have had good luck just using a conical washer that fits in the as well.

 

[Barber213]

Yes they fit. They do stick below the chassis a bit. I have had good luck just using a conical washer that fits in the as well.

Thanks

 

[Mr. Marmot]

Also you can trim the sides of a stock 19t or any other insert, and use it

 

[aelliott70]

Have you checked on the Vertigo website? The inserts for the 5ive-t should work. When fitted the normal way they fit 20t when turned around they fit 22t.
https://www.vertigoperformance.com/index.php?main_page=product_info&cPath=50&products_id=364

 

[kenkamm]

5ive-T inserts do not fit the 30 Deg N chassis in my experience. They are too tight. The slots in the 30 Deg N chassis are very slightly smaller.

 

[Mick Mars]

I use the fonzie mounts on my 5t 2.0. I bought 2 sets and considered them as a sacrificial part. Did have to modify upper mount slightly. Not concerned with inserts as l set mesh "" by ear"" , little ""tick"". The mounts help save the chassis somewhat, that's why l call them sacrificial. All in all, work great and recommend highly.

 

[Flh003]

I have them on my 30dn. They seem to work for setting my mesh. I did drop one tooth on pinion to get more out of the corners. Now I'm just waiting for all this dang snow to stop!!

 

[Aj_31]

They work great, a little snug but no complaints!