Front CVT binding?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
A

amstel78

Senior Member
Messages
188
Reaction score
0
I currently have my ATV set on my Spektrum to 50% for L/R; anything more and the CVTs begin to bind inside the cups. They will still bind a little on a hard corner as the wheels are being pushed/pulled to the extreme. I can see the front tires chattering or hopping depending on how fast the car is turning. Is there a mechanical way to limit how far the wheels turn?
 
Better check the pins and set screws first.

I had the clip/nut from the steering/c-hub mount rubbing on the cv joint.

It wore away quite a bit of the cv cup.

A shorter servo arm will make the steering less...
 
andyken said:
Better check the pins and set screws first. I had the clip/nut from the steering/c-hub mount rubbing on the cv joint.

It wore away quite a bit of the cv cup.

A shorter servo arm will make the steering less...
Click to expand...
Pins and set screws checked out OK. I'll look into shortening the servo horn; I'll move the ball down a hole and see what happens.
 
Look at the ball end of the cv joint .. you may need to take some sand paper to the ball due to a tight fit inside the hub
 
Back
Top