Alloy case conversion kit for Carson Gas Devil 4x4 (Smartech Titan) only, can be used for the center differential only
Comes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings, diff tube and the parts for the slip adjustment device.
Adjustment of the locking effect:
The adjusting screw which presses on the bevel gear axle and the thrust bearing regulates the locking. This causes friction between the bevel gear and the diff. housing. The locking effect can be adjusted between 0% and about 90%. The adjustment has to be changed according to track surface and dirt accumulation.
Loosen the locking effect completely if the track is wet.