Front steering metal spacers

[bobvic1217]

I cant keep in the bushing/spacers for the front steering, I have exhausted my 2 home depots in my area in the plumbing section. About every 20 minutes, Im losing a screw and bushing somewhere. It just falls out. Yes, I locktite them.. I just cant seem to keep them in. I am using the GunMetal Sterring mount assembly. Does anyone else have this problem? or have any recommendations? Thank you

 

[DemonRC1]

You have to make sure that the bolt is not getting loosened as the steering assembly moves back and forth. I use alot of red locktite and then back the screw out a half turn so that everything moves freely. I haven't lost a bolt yet. My bolts are locktited into 7075RC steering knuckles. Are you using the Redcat steering knuckles?

 

[RampageHopUps]

Make sure you wait 24 hours after you loctite it.

 

[bobvic1217]

Yes, I am using the RedCat metal steering knuckles... maybe my spacers that im making are too tight? and don't allow the bolt to move freely? If that's the case, that's why i need the real spacer/bushing? Can't find any aftermarket anywhere. The 7075 steering assembly... perhaps that would work better?

 

[RampageHopUps]

I should have replacement bushings I'm the next week

 

[rcspeedmart]

I should have replacement bushings I'm the next week

Please keep us posted on this I need some badly. Thanks.

 

[RampageHopUps]

X Series Steering Bushings at RampageHopUps

 

[bobvic1217]

thank you

Thank you, thank you thank you!