fuel lines

[Caveman80]

Just wondering about the fuel lines goin to the carb. The line going to the top of the carb is the return and the lower line is the feed right or am I backwards?

 

[Deluge1]

You're correct, sir.

 

[Caveman80]

ok thanks just making sure. I put in a new fuel filter and after a few days I started getting a high and low rev and stall. Now I have to find my air leak and I'm thinking its the intake. I took it apart and can see the warp in it so now looking for a new one.

 

[Deluge1]

Time to upgrade to an aluminum one. Good stuff.

 

[Caveman80]

Just got done with my cart at ddm now just have to waiit for payday

 

[KrashKrieg]

If you are getting an AL isolater block, get one with a lip, the ADA one can cause problems with teflon gasket deforming.

 

[Caveman80]

If you are getting an AL isolater block, get one with a lip, the ADA one can cause problems with teflon gasket deforming.

What one you suggest?

 

[KrashKrieg]

anyone that has a 'lip' on it, there are pictures on DDM if you search for "manifold"

They seem to all be out of stock there, they only have the ADA

(I have and don't recommend since no lip I had problems with teflon gasket deforming)

If you get one of the 'tall' stacks, they will give you a little extra low end from what I've read and heard...

 

[Guest]

I use these and have worked great for me. http://www.largescalerc.com/ShortBilletAluminumIntakeforCYZenoah.aspx

 

[Caveman80]

Does the hbf code work there too.

 

[Deluge1]

Yes, you can use the HBF code at LSRC.