full force fuel line kit

[italjeep65]

I installed the full force fuel line kit with brass fittings and the engine and exhaust can fills up with fuel.This happens when I try to start it.Can anyone help me with this problem?

 

[Revolauncher]

Hmmmm. I would reset the low and high speed needles on the carburetor as it sounds like the larger fuel line is giving you more flow at the carb resulting in the flooding issue.....Guesstimate is 1-1/8 out on low speed and 1-3/8 out on high speed. Make sure you have spark at the plug too........Could be a faulty kill switch kicking in.....

 

[X2Boss]

Revolauncher has got it spot on, I installed FFV2 fuelines and was flooding engine (out the air filter and engine) I turned down slightly more then what you suggested but again can adjust to suit when you get the thig running!

Also if you do over say 7-9 pulls likely hood is you've flooded engine anyway so turn upside down and take plug out and pull 15 times or so (making sure L and H are shut off at carb) if you didn't already know

 

[italjeep65]

Thanks guys for all your help. I just ended up putting the stock fuel lines back on and works fine again. I don't race just bash it.