gear slipping

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
FH MT

FH MT

Well-Known Member
Messages
92
Reaction score
0
Location
Regina SK
my gears on my FH MT are slipping some were it sounds like its coming from the diff but they are fine i had the problem before but when i pulled the diff apart it was were a peice on the diff housing and the gears weren't messed i thing but after i replaced it it started slipping again about the 3 time after i ran it again.
i still have to pull it apart to see whats problem is
but if i can't find any thing what could it be
thanks
 
check the gear mesh between the ring gear and the layshaft gear. if the motor slips out just a hair, when you throttle it, there will be enough chassis flex to spread them apart allowing them to slip. if the gears are rounded from this, you may want to replace them. becouse they are rounded, they will push themselfs apart all the time
 
kryptonite5b said:
check the gear mesh between the ring gear and the layshaft gear. if the motor slips out just a hair, when you throttle it, there will be enough chassis flex to spread them apart allowing them to slip. if the gears are rounded from this, you may want to replace them. becouse they are rounded, they will push themselfs apart all the time
Click to expand...

Agree that could be it.
 
Last edited:
no not yet i tryed to get the gears as close as i could but it still slipped but my parts should be here soon
 
Back
Top