gearing ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
kryptonite5b

kryptonite5b

Well-Known Member
Messages
2,622
Reaction score
4
Location
philipsburg pa.
what is the diffrence in gearing between the mt and tt? once i install my head kit, im going to want to regear,(mt) but im not realy sure as to what im looking at with all these gears. (its not your standard pinion/spur) ive seen the gear chart, but i just need more clarification as to whats what and adjusting wich gears for diffrent appications. im pretty much only going to be looking for more top end.. :confused: :confused:


i see on rampage hop-ups, that when you buy a gear, it comes with another of the same tooth. out of the 4 gears, are there 2 that have the same # of teeth. keep in mind i don't have rig yet. should be here on tuesday.
 
stock mt has 25 pinion(A) and 35 layshaft(b)


the tt has 29 pinion and 31 layshaft as it has the smaller lighter wheels....the c and d 25t remain the same.


I'm running a ported 28.5 so am regearing to mcdgears a and b 27/33...the more powerful engine should pull the slightly taller gearing giving the same or better acceleration and slightly more top end


I also ordered 30/30 for my paddles or buggy wheels which again is slightly higher gear than stock


the higher the pinion (A)gear tooth count the higher the gearing


the sum of gears a and b must = 60
 
You can but it will change the ratio if you look at the chart for MCD you can see that some of the gear setups are the same but in reverse order.
 
Back
Top