glitching servos

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
R

rpking

Member
Messages
67
Reaction score
0
Location
Creston, Ohio
I have two hitec steering servos(5755) on my MT They make a high pitched whining noise when I turn the switch on, and they kinda do the glitching crap too. I notice it more on the servo on the right side of the truck(the one with the trottle servo on top of it) I have it mounted with the futaba aluminum mount. They are wired the way the stock servos were wired. The battery is a 5000mah,(fully charged) the switch is the one that came with my futaba 3pm radio. My truck steers great, everything seems to work ok, just have the glitchy noise issue, and i did bind the radio and receiver. Sorry i wrote a book here, just trying to explain everything. Any idea's??? Thanks for your time and knowledge!!
 
got it too

rpking said:
I have two hitec steering servos(5755) on my MT They make a high pitched whining noise when I turn the switch on, and they kinda do the glitching crap too. I notice it more on the servo on the right side of the truck(the one with the trottle servo on top of it) I have it mounted with the futaba aluminum mount. They are wired the way the stock servos were wired. The battery is a 5000mah,(fully charged) the switch is the one that came with my futaba 3pm radio. My truck steers great, everything seems to work ok, just have the glitchy noise issue, and i did bind the radio and receiver. Sorry i wrote a book here, just trying to explain everything. Any idea's??? Thanks for your time and knowledge!!
Click to expand...
Got the same thing too. Thought Hitec would take care of the problem, but it didn't. but besides the twitching, it works great. So I just try to live with it. Not hurting anything, i don't think :confused:
 
Sounds like they might be fighting each other. Did you zero out the trims before you did the rebind? Did you let the servos center before you put the steering linkage back on?
 
yes and yes, but I'm going to do it all again just to make sure I didn't miss something, I will let you know how it turns out. Thanks for the help
 
Back
Top