got my car ready for decide and

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
michaellfc95

michaellfc95

Well-Known Member
Messages
545
Reaction score
0
Location
liverpool
i got my car ready for decide checked the electronics were working and the throtle servo didnt move so i striped it dow b4 and forund one of the parts on the sercit board has melted has any one else had this ?? its only had about 2 tanks throw it

picture.php



picture.php


picture.php



picture.php


im gona ring rcmodlez tomoz and see what thay say
thanks
michael
 
the standard servos not meant to be to good mate , but saying that i got 7months out of my ones, rc pitstop in southport doing bluebird metal gear,d servo for £20, but ring rc modelz 1st and see wot they say.
 
pablo said:
the standard servos not meant to be to good mate , but saying that i got 7months out of my ones, rc pitstop in southport doing bluebird metal gear,d servo for £20, but ring rc modelz 1st and see wot they say.
Click to expand...

i will should i keep the mettle gears out of this one ?
 
I bought two of these cars, both steering servos went bad, one the second time I run it, and 1 throttle servo dumped thus far, Both of the steering servos smelled burnt when i pulled them out.
 
racersnow said:
I bought two of these cars, both steering servos went bad, one the second time I run it, and 1 throttle servo dumped thus far, Both of the steering servos smelled burnt when i pulled them out.
Click to expand...

ye thats the throtle serove i need to seand it to rcmodlez tomoz and thay will send me a new one
 
Are they oging to replace with the same servo, or upgrade free of charge?
If it's the same, it's worth asking if they'll upgrade, what options they have, ... hold back before they suggest there's extra to pay ... perhaps you'll get it at no extra cost.
Worth a try anyway. Put something decent in.
Al.
 
Back
Top