Help Engine won't start

[Mike bad ass]

Going from breaking in 20 :1 to 30:1 now won't start . Have spark and fuel. Called redcat three times now did everything they said still won't start don't get it ran so great during break. Can anybody help?

 

[Deluge1]

Reset the carb needles back to factory, then pull the plug and let the cylinder air out overnight to clear out any excess fuel. After that, try to fire it up.

 

[Mike bad ass]

Reset the carb needles back to factory, then pull the plug and let the cylinder air out overnight to clear out any excess fuel. After that, try to fire it up.

Thank you try all that it finally started been working great sense .

 

[Randy Blanks]

Going from breaking in 20 :1 to 30:1 now won't start . Have spark and fuel. Called redcat three times now did everything they said still won't start don't get it ran so great during break. Can anybody help?

Mine did the same thing and it was the coil

 

[Randy Blanks]

Mine did the same thing and it was a bad coil

 

[crankestein]

Next time it does not start, no need to leave open overnight. Simply close both needles, and crank up, it will start using the excess fuel in the engine.

It will eventually die as it will run out of fuel, but make sure the truck is facing toward a wall, or be ready to kill the engine, a quick over-rev wont harm the engine from when it leans out after consuming all the fuel.

After that, just set the needles and done.