I was wondering if you chaps could aid me in pricing a car up.
Its a converted Losi Eight from gas to Electric.Spec is as follows.
Motor:::Specs:
Size: 40x68
Kv: 2560
Poles: 6
Max Amps: 120A
Max Volts: 21v
Max Watts: 2200w
Idle Current: 5.0A
Resistance (Ri): 5.8
Shaft size: 5mm
ESC::::Cont. Current: 150A
Burst Current: 250A
Car Size: 1/8th
Battery: 2-6 Cell Lipo
S-BEC: 5.7V / 3A Output
Motor Type: Sensorless Brushless
Size: 48.8 x 57.8 x 35.8mm
Weight: 88g
Battery Plug: Required
On/Off Switch: Yes
Reverse: Yes
Thermal Overload Protection: Yes
Battery Terminals: 10AWG size
Motor Terminals: 10AWG size
Programmer card::
rogramming Options
Voltage Cut off
Drag Brake
Brake Strength
Punch Control
Reverse type
Motor Timing
Suits Turnigy Track Star 18A,100A, 120A (1 Cell) and 150A ESCs
Servo:::TGY-MG959 spec.
Control system: +pulse width control 1520usec neutral
Required pulse: 3-5V peak to peak square wave
Operating voltage: 4.8V
Operating temperature range: -20~+60C
Operating speed: 0.2sec / 60 degree at no load
Stall torque @ 4.8V: 166 oz/in. (12.0kg.cm)
Stall torque @ 6.0V: 200 oz/in. (15.0kg.cm)
Operating angle: 45 deg. one side pulse travelling 400usec
Direction: Counter clockwise/pulse travelling 1520-1900usec
Motor type: Coreless motor
Potentiometer drive: Indirect drive
Bearing type: Dual ball bearing
Gear type: All metal gears
Connector wire length: 12in
Dimensions: 40.2 x 20.1 x 36.8mm
Weight: 2.64oz. (75g)
Radio and receiver:::Key Features;
2-channel 2.4GHz transmitter with servo reversing.
Easy to use control for basic models.
Includes 3-channel receiver
Trainer system option.
This system does not need a PC to program servo direction.
Specification:
Model: Car/Boat
Channels: 2ch
RF power: Less than 20dbm
Modulation: GFSK
Code type: Digital
Sensitivity: 1024
Low voltage warning: Yes (less than 9V)
DSC port: Yes (3.5mm)
Charge port: Yes
Power: 12VDC(1.5AA x 8)
Weight: 328g
Antenna length: 26mm
Size: 159 x 99 x 315mm
Receiver;
Model: Car/Boat
Channels: 3ch
Frequency band: 2.4Ghz
Modulation: GFSK
Sensitivity: 1024
RF. receiver sensitivity: -100dbm
Power: 4.5~6VDC
Weight: 5g
Antenna length: 26mm
Size: 37.6 x 22.3 x 13mm
Plus conversion kit and pinion/spur In excellent used condition.
J.
Its a converted Losi Eight from gas to Electric.Spec is as follows.
Motor:::Specs:
Size: 40x68
Kv: 2560
Poles: 6
Max Amps: 120A
Max Volts: 21v
Max Watts: 2200w
Idle Current: 5.0A
Resistance (Ri): 5.8
Shaft size: 5mm
ESC::::Cont. Current: 150A
Burst Current: 250A
Car Size: 1/8th
Battery: 2-6 Cell Lipo
S-BEC: 5.7V / 3A Output
Motor Type: Sensorless Brushless
Size: 48.8 x 57.8 x 35.8mm
Weight: 88g
Battery Plug: Required
On/Off Switch: Yes
Reverse: Yes
Thermal Overload Protection: Yes
Battery Terminals: 10AWG size
Motor Terminals: 10AWG size
Programmer card::
rogramming Options Voltage Cut off
Drag Brake
Brake Strength
Punch Control
Reverse type
Motor Timing
Suits Turnigy Track Star 18A,100A, 120A (1 Cell) and 150A ESCs
Servo:::TGY-MG959 spec.
Control system: +pulse width control 1520usec neutral
Required pulse: 3-5V peak to peak square wave
Operating voltage: 4.8V
Operating temperature range: -20~+60C
Operating speed: 0.2sec / 60 degree at no load
Stall torque @ 4.8V: 166 oz/in. (12.0kg.cm)
Stall torque @ 6.0V: 200 oz/in. (15.0kg.cm)
Operating angle: 45 deg. one side pulse travelling 400usec
Direction: Counter clockwise/pulse travelling 1520-1900usec
Motor type: Coreless motor
Potentiometer drive: Indirect drive
Bearing type: Dual ball bearing
Gear type: All metal gears
Connector wire length: 12in
Dimensions: 40.2 x 20.1 x 36.8mm
Weight: 2.64oz. (75g)
Radio and receiver:::Key Features;
2-channel 2.4GHz transmitter with servo reversing.
Easy to use control for basic models.
Includes 3-channel receiver
Trainer system option.
This system does not need a PC to program servo direction.
Specification:
Model: Car/Boat
Channels: 2ch
RF power: Less than 20dbm
Modulation: GFSK
Code type: Digital
Sensitivity: 1024
Low voltage warning: Yes (less than 9V)
DSC port: Yes (3.5mm)
Charge port: Yes
Power: 12VDC(1.5AA x 8)
Weight: 328g
Antenna length: 26mm
Size: 159 x 99 x 315mm
Receiver;
Model: Car/Boat
Channels: 3ch
Frequency band: 2.4Ghz
Modulation: GFSK
Sensitivity: 1024
RF. receiver sensitivity: -100dbm
Power: 4.5~6VDC
Weight: 5g
Antenna length: 26mm
Size: 37.6 x 22.3 x 13mm
Plus conversion kit and pinion/spur In excellent used condition.
J.
