Help, rear diff cup grub screw is gone
- Thread starter rcaddict12
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
thanks.
atom3624
Well-Known Member
Never tried it.
It is common on 1/16 and 1/10 Traxxas trucks and vehicles.
My guess is better as designed. Replace the grub screw - use blue threadlock and leave overnight (minimum of an hour or so at least).
Al.
It is common on 1/16 and 1/10 Traxxas trucks and vehicles.
My guess is better as designed. Replace the grub screw - use blue threadlock and leave overnight (minimum of an hour or so at least).
Al.
nitrocat
Well-Known Member
It won't hold every time you put on the brakes it will loosen diff with out a nylon lock nut
rcaddict12
Member
- Thread starter
- #4
Help. what should I do?
Hi guys... b4 I posted sumthin about the rear diff cup drilling... the drilling of the shaft FAILED. So I went amd baught some 5mm grub screws. Now I'm going to take apart the rear diff..., and replace the whole shaft/diff cup/ bearing assembly and it should work. Ill keep yall posted.
Hi guys... b4 I posted sumthin about the rear diff cup drilling... the drilling of the shaft FAILED. So I went amd baught some 5mm grub screws. Now I'm going to take apart the rear diff..., and replace the whole shaft/diff cup/ bearing assembly and it should work. Ill keep yall posted.