Hitec 5755 mounting problem

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

hotrod45

Well-Known Member
Messages
337
Location
sarasota, fl. previous st p/mpls
i just received a new hitec 5755 servo, following the advice of several form contributors, indicating it is a good steering servo. so, the problem i just encountered id that the mounting flange is 1/4" narrower then the pre drilled holes. i am installing this servo in a hpi radio box. you guys who have done the replacement with large scale servos tell me what the trick is here. thanks for your help.
 
get the one side mounted and flex the mount a lil bit, Thats how I did mine and it has worked perfect for me.
 
servo

chad, before i tried your method, i went to my box of left over hpi parts and found an extender which screw on the bottom of the mounting bracket and slides toward center so you can get the servo mount holes to line up! worked great!
 
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks