Hitec HS-5765MH

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
I'm going to say yes, I've asked the same question. If you check under electronics. You'll see that it was discussed a couple of times.
 
If you run one, you should install the single servo battery box. It will give you the room to run a larger battery.
 
Yes, they are just not up on the site. Shoot me a pm and I'll send you an invoice if you need one.
 
Here are the specs if you want to compare the two.

4611fecbb6fdd84a7b86b520363480c9_zpsf21f07c2.jpg
 
Ah thanks bro....looks like the 5805 will be a better choice but not by much but it does looks like the 5765 can handle a bit more juice. Just curious, what would you recommend? Thanks
 
Last edited by a moderator:
I prefer to use 2s lipos for receiver batteries, so I run servos that can handle it. Most of the Hitecs do fine on higher voltage. I have never tried a 5805 with higher voltage. I might have to give one a try. :D
 
RCDAD said:
I prefer to use 2s lipos for receiver batteries, so I run servos that can handle it. Most of the Hitecs do fine on higher voltage. I have never tried a 5805 with higher voltage. I might have to give one a try. :D
Click to expand...
HaHa...ok, video tape when you do. Want to see if it can handle it :D
 
Back
Top