hitec servo

[mr.33trucker]

hi all where is agood place to get a hitec 5745 at a good price? also is there a better one for steering? thanks again for the help

 

[Sprint 77]

5745 is a good steering servo , throttle I would get a 7985 , most use 5645 but they are pretty low grade slow servos on the hitec line.

 

[hamster huey]

Hitec 5625 $54.99 / Tower hobbies ts-160 $47.99 digital mg throttle brake .14 130 @6v


Hitec 5645 digital mg throttle brake .18 164 @6v $54.99


5755mg?? New Hitec large scale??? $90


5645 too slow for me. I like the 5625/ts 160 which are both hitec


Rhino is best but I have a hitec steering 45.

 

[6victor6]

hi all where is agood place to get a hitec 5745 at a good price? also is there a better one for steering? thanks again for the help

5745... 65 bucks shipped


http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320478901807&rvr_id=&crlp=1_263602_263622&UA=M*S%3F&GUID=fea70cc61210a0b582c52385ff9d97a9&itemid=320478901807&ff4=263602_263622#ht_1856wt_1167

 

[pipeous]

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=330400924624&ssPageName=STRK:MEWNX:IT


almost the same arrea. I just got 2 and shipping was cheap (only $5 to canada for 2 servos)

 

[hamster huey]

So hobbico, tower hobbies, hitec, and rhino servos all share parts? I have been a hobbico, tower hobbies, hitec servo man for a while because they all share parts but now maybe my next will be a rhino.

 

[hamster huey]

Thats why I love hobbico/tower hobbies/hitec servos they share parts (but they are not always completely the same). If hitec/rhino are sharing some parts Ill get a rhino. Its nice to know that when a gear, motor, board, or some other parts goes you can easily get if it shares parts with other brands. Servocity.com is my favorite place.

 

[enricovrrc]

i have but a hitec 5805 and works really nice 0.14 sec/60º and 347 oz/in and for throttle i choose futaba bls 451 speed 0.10 and 147 oz/in my rampage tt5 brake very good.

 

[lvh]

Will the hitec fit the stock rampage mount or must u get different mounts?

 

[Sprint 77]

The mounts will have to be modded slightly. Best if you knock off the extruded bosses with a dremel and fill holes with JB Weld then drill and tap the new holes at the hitec distance. Some just knock off the lowers and just use the upper holes.

 

[lvh]

Cool thanks sprint.