HK's lastest brushless motor offering.....

[bigfol]

http://www.hobbyking.com/hobbyking/store/__21969__Hobbyking_X_Car_4976_1740KV_Sensorless_Brushless_Motor.html


I'm tempted to give it a try, at 1740kv it sure would rip it up......although its max amp pull is 135amps not a good as the T-5692, rpm would be 50k on 8s and 38k on 6s,geared correctly could be on a winner.....and all for less than $90.00 its probably worth doing just to see the look on my mate face when I flog him around the track.....


There are 2 others available 580kv and 870kv although one of these only comes in a 6mm shaft.....

 

[Guest]

HMMMMMM.. Maybe I should get that instead of my 5692 on back order. That would still work with the stock esc.

 

[ninjagaiden1]

It's got to be better than the stock motor when running the Stock ESC. Mounting holes look like an unusual pattern though...

 

[bigfol]

It's got to be better than the stock motor when running the Stock ESC. Mounting holes look like an unusual pattern though...

Yeah I noticed that too, more modding I guess....

 

[Deluge1]

Sweet motor!

 

[ninjagaiden1]

Actually the mounting holes look similar to the Feigao 580 XL. I wonder if this is an HK special version of it with the CNC machined case.

Video on Youtube ...

[ame]

[/ame]

 

[Guest]

Sure looked like it. Most likely made in the same factory.

 

[Deluge1]

No vids of it running, yet?

 

[kaztheminotaur]

The 6000W peak power seems a little high to me though.

 

[bigfol]

The 6000W peak power seems a little high to me though.

+1 I think it may run pretty hot, only one way to find out I guess....

 

[bigfol]

http://www.hobbyking.com/hobbyking/store/__24850__Turnigy_TrackStar_1_5th_Sensorless_Brushless_Motor_730KV.html

And another one....These track star motors have worked well for me in the past,in 1/8th scale models, I hope this one works the same.

 

[Deluge1]

Beautiful motor!

 

[bigblkblazin]

Say whaaaat....

Just need a big ass brushless controller thats can handle 11s that doesn't cost 750...

 

[bigfol]

Say whaaaat....Just need a big ass brushless controller thats can handle 11s that doesn't cost 750...

Stay tuned its coming, but then again so is christmas......

 

[Deluge1]

Yikes! $750 for a brushless controller?

 

[Guest]

http://www.hobbyking.com/hobbyking/store/__24850__Turnigy_TrackStar_1_5th_Sensorless_Brushless_Motor_730KV.htmlAnd another one....These track star motors have worked well for me in the past,in 1/8th scale models, I hope this one works the same.

I have one on the way to try. For now the Leapord is going in. Just waiting on a pinion.

 

[bigfol]

I have one on the way to try. For now the Leapord is going in. Just waiting on a pinion.

Good stuff, looking forward to seeing how it performs.....

 

[ninjagaiden1]

Stay tuned its coming, but then again so is christmas......

Seriously! Please spill the beans on what you know... 11S setups for 1/5 would be awesome.

 

[Guest]

Hell yeah!

 

[twissted]

This is the motor from HK you should be looking at!

Hand wound! Enough said!