Hpi AfterMarket on Xb?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Silent_Chaos

Silent_Chaos

Well-Known Member
Messages
901
Reaction score
1
Location
Beirut, Lebanon
Sup,


I was wondering if the below mentioned products can fit the XB.


1) Shocks:


http://www.davesmotors.com/tr69x


I read RCDAD mentioning that the front shocks of the HPI would fit both Front and Rear of the XB with minor tweaking (driling the tower as such it is not a direct mount)


can someone advise if I get the shocks in the above mentioned link, what are the additional missing parts that I need to make the it fit the XB?


at the bottom of the page, it says:


.:Needed & recommended Parts:.


•Shock Oil - 57ml (2oz) ~ fills two and half shocks.


I guess, I'll get the LOSI oil


•Baja 5B 5T SS Rear Shock Brace - part# 87551


is this necessary for XB mount?


•recommended - front shock braces for extra support - Innovative-RC or other. (TR fully comparable with TR top pivot stand-offs)


is this necessary for XB mount?


2) K&N Air Filter:


http://www.davesmotors.com/s.nl/it.A/id.761/.f


I have the Stock motor with Wt-990 carb installed, is this filter a Direct mount?


if you see the drop down menu, you can see 4 options, can anyone advise me which ones to use?


3) CVD arms:


http://www.davesmotors.com/s.nl/it.A/id.3361/.f


I would like to replace the 4 stock CVDs that comes with the Xb,


does anyone have experience if the above fits the Xb?any additional mods?
 
The shocks will work you may need to make some spacers,the hpi shock braces will not work, I would not run the K&n unless you are just running on pavement most people are running the stock hpi filter or what I use is the DT1 filter and FLM makes all the cvd and driveline parts for the XB
 
rampage idiot said:
The shocks will work you may need to make some spacers,the hpi shock braces will not work, I would not run the K&n unless you are just running on pavement most people are running the stock hpi filter or what I use is the DT1 filter and FLM makes all the cvd and driveline parts for the XB
Click to expand...
can you link me to the DT1 filter?

and are you saying that the stock CVD and drive line is FLM made?

if not, please link me I'd be thankful.
 
Silent_chaos said:
for the CVD, it says here, Front CVD Kit For Rampage XT and XT (im sure they meant for XB), however is the front CVD the same length of the rear CVD??
Click to expand...
All the X series cars use the same diff to wheel shafts. So the dogbones and CVDs are interchangeable between the vehicles and work on front or back.
 
Just added to cart the Foam Filter -Triple Flow and DDM Tall RC / CY Velocity Stack,

they mention that it fits Walbro WA / WT / WYK style carburetors, I have the wt-990.

let's see how this will end up looking
 
sorry for the repetitive questions, but I wanna gain every dollar from DDM's Black Friday.

what will be the difference in terms power/acceleration/high-end-speed between installing a 8000 rpm spring and DDM Premium 9500 High-RPM spring over the stock one?
 
Back
Top