I had no Idea!

[Deluge1]

My guess would be an air leak. Possibly around that bolt you used to plug up the intake. I'm assuming it ran well before you plugged it.

 

[Boostcreepr]

I used plumbers tape and its tight. I don't see our leading from there

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Deluge1]

Reset your needles to factory and see if you can get it to run long enough to test for an air leak. If you have some carb cleaner, spray some around the intake area. If the idle fluctuates at all when you hit a certain spot, that's your air leak.

 

[Boostcreepr]

Homemade rear exit exhaust! Love it!Sent from my SAMSUNG-SGH-I747 using Tapatalk 2





/monthly_2013_06/uploadfromtaptalk1372557112259.jpg.13c29217c48359e5ba8619ef1872434e.jpg

 

[Guest]

That looks cool.

 

[Boostcreepr]

First attempt was jb weld.. basically fell off after 24hr cure and I bumped into it. So I took it to a guy on craigslist and he welded it for me.Sent from my SAMSUNG-SGH-I747 using Tapatalk 2





/monthly_2013_06/uploadfromtaptalk1372559797506.jpg.bfd66ef0fe1afdc5c3ed9553c762a0f2.jpg

 

[Boostcreepr]

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Guest]

The rear exit is very scale looking.

 

[Boostcreepr]

Hey Brian. .. lolSent from my SAMSUNG-SGH-I747 using Tapatalk 2









/monthly_2013_07/uploadfromtaptalk1374025760995.jpg.296f5c93e6ee729dd2cb9c3ec6676ae8.jpg

/monthly_2013_07/uploadfromtaptalk1374025789885.jpg.8c67753a31bb7c9bdf14655018b3300c.jpg