rabbi_tuckman
Junior Member
Does anyone know the stock setting for the idle screw. I have looked everywhere for it and can not find it. The screw was completely backed out when I received umy chimera. Any help would be greatly appreciated.
Idle screw setting
- Thread starter rabbi_tuckman
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Ice_2k
Well-Known Member
- Messages
- 1,389
- Reaction score
- 5
Idle screw setting
There is no standard default setting for the idle screw. In my case it's 2.5 turns out, but I'm sure it differs from carb to carb. I usually unscrew it until the engine feels like it's gonna die and then screw it back about 1/4 turn, this gets me that nice round idle. Obviously, all of this needs to be done after you tune your LSN, since that affects the RPM.
There is no standard default setting for the idle screw. In my case it's 2.5 turns out, but I'm sure it differs from carb to carb. I usually unscrew it until the engine feels like it's gonna die and then screw it back about 1/4 turn, this gets me that nice round idle. Obviously, all of this needs to be done after you tune your LSN, since that affects the RPM.
rabbi_tuckman
Junior Member
- Thread starter
- #3
Thanks for the quick reply. I will try that adjustment.