I'll be ording a belt kit!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
J

JDH

Well-Known Member
Messages
88
Reaction score
4
When I got this thing I checked every bolt and screw...or so I thought!


We were racing around a field and I heard a pop and some grinding....


Opened her up and the drive gear nut loosened up. I never put locktite on it due to being a poly-lock nut. Of however many teeth it did have there is only 3 on the drive gear and about 8 on on the secondary gear!


I'll be ordering a gear drive this Friday I guess.


I don't think I'm that hard on it, but I break the damn thing every time I take it out. In 6 months everything should either upgraded or replaced...lol.


JD
 
Last edited by a moderator:
ya its plastic.

ill be getting a metal one next. im going back and forth if i want a 2 speed kit or the belt drive. thinking be belt drive as the terrain i drive is mostly rough and dirty.
 
MT gear plate is the way to go for gears. no flex, no gear jumps. and oversized bearings. definitely THE first thing to switch out, never even ran the plastic one.
 
Ir I get the belt drive doesn't that come with a new Metal gear plate from 7075 rc?

JD
 
phreerider said:
MT gear plate is the way to go for gears. no flex, no gear jumps. and oversized bearings. definitely THE first thing to switch out, never even ran the plastic one.
Click to expand...
Mine works just as well and it comes with all the bearings so in the long run it is a better deal, weighs less too.
 
guess ill be ordering Ol'farts plate and replacing the gears with stock then.

JD
 
I Had all strip at once on glass smooth asphalt at 46mph ...found that the nylon on the nuts her hot and soft and work their way loose and all hell breaks loose. This is the third time to replace all the gears.
 
ripping down the road is when mine went as well. I wonder if putting a standard nut on with a locktite and star crush washer would be a better option...besides just doing away with it all together.

JD
 
I might have went a lil over board....

ordered my 7075 gear plate...

then...

15448 - High Response Clutch Shoe/Spring Set (8000 RPM)

Ratio Rite Measuring Cup for 2 Cycle Oil

* FREE Screwdriver Without Magnet with Purchase of $50 or more

Blue Medium Strength Thread Locker

101 - "Shread Stack" Filter Adapter for HPI Baja 5B / 5T

WT-990 High Performance Racing Carburetor

3100 - Billet Aluminum Intake for CY / Zenoah - GTB Racing

Rampage XB and XT Side Mount Pipe - By Jetpro

KRC-KS-SBK3 - Super Bee Remote Kill Switch / Failsafe

DT1-2003 - DT1 Triple Stage Filter - Mounts to Standard Velocity Stack - Losi 5IVE-T

07186 - 29 Tooth Steel Gear for Rampage

07185 - 31 Tooth Steel Gear for Rampage

Well at least I got a free screw driver....woohooo!

JD
 
Back
Top