I'm here if any type of help is needed.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
well after looking at the dim's to that servo, your gonna have to mod the bracket either cut or grind away some material to get it to fit,
otherwise you don't want hear this but you should of just paid the additional funds and got the hitec servo 805bb, that runs around $40-50 and it drops right in
 
thought that was the only way to do it.....that sucks, i was really hoping to get a major component installed on it soon, but what're ya gonna do?
oh, and that servo has less torque than the stock baja 5b ss servo, where as this one has more than stock :/
 
And a good day to you lot.
You know those lovely 8mm shocks with the compensation chamber - how do you fill them?
I filled up the main chamber, put back the top of the shock, took off the compensation chamber, filled that to the top - now what about the air in the top part of the shock? because if you take out all the air(i did) you can hardly move the shaft and it pushes out oil at the seals. PLEASE GIVE ADVICE!!!!
 
generally you fill up to the threaded area of the shock from the bottom inside of the shock tube, not from the top, too much oil in the shocks and it wont fuction properly and will be too hard due to no room for movement of the oil,end up bending the shafts on the first few hard landings if not worse popping the shocks apart,
 
Baja 5b 2 speed help

Hello how are u I bought a used baja and the 2 speed won't engage car barely moves while two speed is turning could this b the 2 speed one way bearing and how do u take apart thank you Julio
 
I strongly believe his intention was and is to help forum members

They are some members just want to make a comment so that they can be noticed and they are the ones who may lack knowledge and have never given any positive and useful input in the forum

I say ignore them !!
 
Back
Top