Integy type 2 Two speed trans

[Houpie]

Hi all, how do I remove the large spur gear with the one way bearing? New to the Baja 1/5 scale. Thanks

 

[zxb466]

I am not familiar with the integy gears but I know the stock spur is securred with a large E/C clip. Does that one have a clip in front of it?

 

[Houpie]

I am not familiar with the integy gears but I know the stock spur is securred with a large E/C clip. Does that one have a clip in front of it?

Not that I can see. Thanks for replying

 

[spents]

View attachment 93082

Not that I can see. Thanks for replying

looks like its bolted with 4 bolts from the back side to a carrier fella ,

edit, if you mean getting the whole thing off the layshaft it looks like theres a keyway for the shaft/bearing, should just slide/wiggle off the shaft by the looks of it,

 

[Houpie]

looks like its bolted with 4 bolts from the back side to a carrier fella ,

edit, if you mean getting the whole thing off the layshaft it looks like theres a keyway for the shaft/bearing, should just slide/wiggle off the shaft by the looks of it,

Thank you, I’ll give it a shot. Just didn’t want to go forcing something because I wasn’t sure