lordraptor1
Well-Known Member
- Messages
- 877
- Location
- ardmore oklahoma
i have a few things up for sale right now, as well as a list of what i am in need/want of for my baja. i will consider trades but only for items on my list.
also note that only looking to deal with persons in the lower 48 United states, ok so without further delay (list of want/need items is below FS/FT list
):
up for sale is a westy wood clock made by me during rec therepy at the VA. clock is finished in a cherry stain and varnished. the little fleur-de-lise are natural and like the rest of the clock is varniched with a high gloss clear.
the clock is battery powered and chimes on every half hour and hour (ala grandfather clock). this is a nice piece for a table or desktop and would make an nice little gift for someone as well. 90.00 shipped
NIP silver/raw TR front shock mount, ordered to use but found it doesn't fit my flm shock tower 24.00 shipped
stock cy clutch housing, little use on it replaced it with a TR unit is all 10.00 shipped
kobo 1Gb Wi-Fi E-reader (used twice): (90.00 shipped)
NIP darksoul meaty mount: 10.00 shipped
NIP flm extended dogbones: (20.00 shipped)
stock hpi drive axle from ss kit very little use: (20.00 shipped)
stock 5B can muffler (new unused) (10.00 shipped
hpi racing banner (LARGE) COLOR="Red"](50.00 shipped for both large and small banners)[/COLOR]
HPI racing banner (small)
CC mamba25 1/18 brushless system ( got it in a trade some time back and all i can tell you is it is by castle creations, is for 1/18 scale, and has the castle link programming tool with it (i have NEVER hooked it up or tried it i do know the motor is good because i bought it new ): 40.00 shipped
turns out the esc DOES work unfortunatley it is not for a car and is in fact an aircraft esc GRRRRR (thats what i get fouy buying it used off of RCG
orange integy type II pullstart handle (slightly used) (10.00 shipped)
lightly used hpi plate lot, stock plates from 5Bss includes everything in the pics 50.00 shipped
parts lot everything in pics included 50.00 shipped
turtle racing brake plate (NOT the 1 piece unit) 15.00 shipped?
NEW bushnell 4 X 30 binoculars (box damage from sitting in storage but never been out of the box except to take these pics) (20.00 shipped)
i also have a goldberg anniversary piper cub i could part with but shipping would be problematic however i could meet within a 100 mile radius (especially for cash). built in clipped wing configuration, it has NEVER seen fuel and includes a magnum XL.70 FS engine with appropriate prop, scale cub wheels (as the cub hubcaps), fuel tank, quick fueler, remote glo, sullivan golden rods, and is covered in cub yellow fabric covering. it is brand new and again it has never seen had a drop of fuel in it yet (NO radio gear included with the plane) 300.00
list of things i want/need and are listed in orderof greatest want/need to least
drivetrain parts (these items have highest priority right now):
hpi hd idle gear (5B)
hpi hd drive gear (5B)
craftworks billet spur carrier
craftworks Ti layshaft
hostile axle boots (grey)
hemistorm max hex for 5B
hostile 57t spur gear
fullkill rc "Biggies" throttle linkage
(rims, tires, foams):
cst spike wheel nuts
baja skunkworks slotted beadlocks (black or silver)
silverback hd lipped outer beadlocks (5B black)
silverback hd outer beadlocks (5B black)
hostile mxt front tires for 5t/5sc (120 x 60mm)
hostile dual material molded front foams (soft)
silverback mercenary rims (front and rear for 5B)
extra stuff, tools, etc.)
baja skunkworks rollcage quick release
overkill coil spacer
craftworks spark plug wire kit (black or grey)
also note that only looking to deal with persons in the lower 48 United states, ok so without further delay (list of want/need items is below FS/FT list
): up for sale is a westy wood clock made by me during rec therepy at the VA. clock is finished in a cherry stain and varnished. the little fleur-de-lise are natural and like the rest of the clock is varniched with a high gloss clear.
the clock is battery powered and chimes on every half hour and hour (ala grandfather clock). this is a nice piece for a table or desktop and would make an nice little gift for someone as well. 90.00 shipped
NIP silver/raw TR front shock mount, ordered to use but found it doesn't fit my flm shock tower 24.00 shipped
stock cy clutch housing, little use on it replaced it with a TR unit is all 10.00 shipped
kobo 1Gb Wi-Fi E-reader (used twice): (90.00 shipped)
NIP darksoul meaty mount: 10.00 shipped
NIP flm extended dogbones: (20.00 shipped)
stock hpi drive axle from ss kit very little use: (20.00 shipped)
stock 5B can muffler (new unused) (10.00 shipped
hpi racing banner (LARGE) COLOR="Red"](50.00 shipped for both large and small banners)[/COLOR]
HPI racing banner (small)
CC mamba25 1/18 brushless system ( got it in a trade some time back and all i can tell you is it is by castle creations, is for 1/18 scale, and has the castle link programming tool with it (i have NEVER hooked it up or tried it i do know the motor is good because i bought it new ): 40.00 shipped
turns out the esc DOES work unfortunatley it is not for a car and is in fact an aircraft esc GRRRRR (thats what i get fouy buying it used off of RCG
orange integy type II pullstart handle (slightly used) (10.00 shipped)
lightly used hpi plate lot, stock plates from 5Bss includes everything in the pics 50.00 shipped
parts lot everything in pics included 50.00 shipped
turtle racing brake plate (NOT the 1 piece unit) 15.00 shipped?
NEW bushnell 4 X 30 binoculars (box damage from sitting in storage but never been out of the box except to take these pics) (20.00 shipped)
i also have a goldberg anniversary piper cub i could part with but shipping would be problematic however i could meet within a 100 mile radius (especially for cash
). built in clipped wing configuration, it has NEVER seen fuel and includes a magnum XL.70 FS engine with appropriate prop, scale cub wheels (as the cub hubcaps), fuel tank, quick fueler, remote glo, sullivan golden rods, and is covered in cub yellow fabric covering. it is brand new and again it has never seen had a drop of fuel in it yet (NO radio gear included with the plane) 300.00 list of things i want/need and are listed in orderof greatest want/need to least
drivetrain parts (these items have highest priority right now):
hpi hd idle gear (5B)
hpi hd drive gear (5B)
craftworks billet spur carrier
craftworks Ti layshaft
hostile axle boots (grey)
hemistorm max hex for 5B
hostile 57t spur gear
fullkill rc "Biggies" throttle linkage
(rims, tires, foams):
cst spike wheel nuts
baja skunkworks slotted beadlocks (black or silver)
silverback hd lipped outer beadlocks (5B black)
silverback hd outer beadlocks (5B black)
hostile mxt front tires for 5t/5sc (120 x 60mm)
hostile dual material molded front foams (soft)
silverback mercenary rims (front and rear for 5B)
extra stuff, tools, etc.)
baja skunkworks rollcage quick release
overkill coil spacer
craftworks spark plug wire kit (black or grey)
Last edited:
