Jet pro

[chrisscott961]

Hi I have an xb with rear mount exhaust anyone no how to stop the connection hose from exhaust to manifold to stop melting or is there another connection I can use,thanks

 

[rolandsiringo]

They don't sale that silicone connector but ddm have it they re just little bit to small I think around $2

 

[Phill2]

Hi I have an xb with rear mount exhaust anyone no how to stop the connection hose from exhaust to manifold to stop melting or is there another connection I can use,thanks

There's a place to buy it

I'll have to find a link when I get home from work

It's actually better stuff or you can use silicone tape

 

[Phill2]

This is the tape which works very well

http://www.supercheapauto.com.au/online-store/products/DynaGrip-SOS-Silicone-Tape-White-25mm-x-3m.aspx?pid=326481#Recommendations

You'll just have to find it in your area

 

[Phill2]

https://www.aeroflowperformance.com/silicone/hose/hose-straight/straight-3-76mm/af9001-100

You can cut this and get 2 out of it

 

[Gas]

I used a zip tie instead of the metal screw clamp and that solved my problem.

 

[chrisscott961]

Awesome thanks for the reply's

 

[Phill2]

I used a zip tie instead of the metal screw clamp and that solved my problem.

It stopped the coupling from melting ???

 

[Gas]

The problem I had was the coupling melting under the clamp only. I may have screwed the metal clamp too tight, I don't know, but when I used zip ties it solved the problem and I have used/had the same coupling for the past two years with no problem.

 

[Ice_2k]

I guess it's possible for the metal clamps to prevent some heat from escaping and cause a buildup....

 

[Phill2]

Tanks for the tip Wayne