just brought hitec 5998 titanium throttle/brake servo

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
A

aussie

Well-Known Member
Messages
195
Reaction score
0
hi guys


i tried to buy your reccomendation of the 5645 servo for throttle /brake


they didnt have any,but i brought instead a hsc-5998tg.


it has titanium gear,digital,speed @ 6 volt is 0.19 sec/60 deg &


torque is 18.0 kilo.


should run ok i hope ??


cheers


glen
 
That sounds slow if the specs are right. I like my throttle to have quick response so I would use something with a speed of .15@6v or faster. Those .11 are too fast for me and over .15 is too slow for me. For Ramp I look for 130+oz@6v so it can lock up the wheels. This is all just my preference. You may try it and like it. The specs you gave are close though to the 5645 you orignally wanted.
 
.19 should be fine for this vehicle since you don't need alot of brake travel to get it to brake. Just tighten your brakes up where they don't need so much travel and then lower your EPA. At .19 you should then be able to travel from WOT to braking without a huge lag.


One last thing I would like to mention. When you don't have a radio to set throttle/braking curves, fast throttle/brake servos can be a bit of a headache when ur in a braking panic.
 
update on servos fellas


hi guys


thanks for your replies and help.


well guys,after reading hueys info i went and took back the servo and now have brought tonite a " hs7955tg " digital titanium servo.


here is the facts,


it has 24 kilo brake capacity,


.15 @ 6v speed and 330 oz @6v


this should do the trick along with the good steering servos you told me to buy and got and brought the futaba 3pm 2.3 ghz fasst radio


cheers


thanks heaps


glen
 
Holy cow that Tq is way more than needed! I bet you like the speed better though. You should still try different things for comparison to make up your own mind too.
 
Last edited by a moderator:
hi huey


i will give it a go.


i cant return this servo now!!!


it will have to do.


cheers


glen
 
Back
Top