kill switch/pico switch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
A

aussie

Well-Known Member
Messages
195
Reaction score
0
hi guys


iv got a ts adjustble fan cover,it has no kill switch slot though cut/made.


also i just brought the pico switch cut out mod kit.


when using a pico switch,do you still need to stop engine with stop button on engine or can you switch car engine off @ radio end ??


if so, that will save me from putting switch in fan cover thats all.


or do i still need the switch ??


cheers


glen
 
Hi Glen,


You don't have to have the stop button. I don't have it on mine. I hooked the killswitch up straight to the coil on both of my current builds. I just have a couple of 23's and my button is still there, but I don't have the stop button connected
 
i did keep the stop button on my mt. wich was good, becouse my kill switch eventually failed, so just went back to the button. if your running a kill switch you wont ever use the stop button. you'll need to pull the shell just to turn it off and its easer to just hit the radio switch


ps. it failed from water. and alot of water many times over..
 
Back
Top