Kill Switch

[Trickle007]

Ok I have a Futaba 3PM 2.4 GHZ TX with a 3 channel Futaba RX what Killer bee Kill switch do You all recommend? I see killerrc says my radio equipemnt is compatable with both just curious what you guys would go with V1 or V2?

 

[rcspeedmart]

A V2 killer switch http://www.killerrc.com/faq/comparison_chart.php

 

[Trickle007]

the only difference is kill with power switch or kill with aux switch correct?

 

[rcspeedmart]

Correct the V! you will have to turn your radio off for it to work the V2 you can use a third channel and press a button to kill the switch both of these will be for manual kill of course.

 

[Deluge1]

V1 = Kills the engine with the third channel switch AND when you turn the transmitter off.

V2 = Kills the engine when you turn the transmitter off.

 

[rcspeedmart]

oops said it backwards thanks for clearing that up deluge.

 

[Trickle007]

Thanks for clarifying this. Considering I don't use lights I think I will get V1

 

[Guest]

V1 = Kills the engine with the third channel switch AND when you turn the transmitter off.V2 = Kills the engine when you turn the transmitter off.

Also you have to wire the V1 the the third channel on the receiver.

The V2 splits off the steering channel leaving the third open for something else like lights.