Killer bee v2 issue

[Boriqua935]

Today wires got Loose. I resoldered the wires back. One on red ignition wire and one on black ignition wire. Problem is that the kill switch works, but I cat kill engine with the red stop engine switch. Only the killer be works. What did I do wrong?

 

[Obeast44]

Have ya made sure the wire are still plugged into the back of the switch itself? Sometimes they wiggle loose on me.

 

[Boriqua935]

Yeah they are

 

[Obeast44]

Hmm maybe the switch itself has went bad? Take the 2 wires that plugged into the switch and touch them together to see if they will kill the engine. If they do that switch is bad. CAREFUL: you can get a shock if your barehanded.

 

[Boriqua935]

Well I can tell u the engine kills with the killer b but not the stop button. Will try that though. Thanks

 

[pipeous]

well it has to be either unplugged or the switch is bad if the kbv2 works. all the kb does is connect those wires electronically

 

[Boriqua935]

I think it's switch cause kb is working and it's soldered to kill switch leads

 

[Boriqua935]

Change switch. All fixed. Thanks guys