killer rc kill switch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
J

j_cifelli

Member
Messages
31
Reaction score
0
Hey everyone thanks for reading. My killer bee keeps shutting my car off the led light will flash then go solid and I can start it again .never shuts off while actually driving only when idle. Idk what it could be any ideas?
 
j_cifelli said:
Hey everyone thanks for reading. My killer bee keeps shutting my car off the led light will flash then go solid and I can start it again .never shuts off while actually driving only when idle. Idk what it could be any ideas?
Click to expand...
Call Kent at killer rc he will help!! But did it get wet?? How's your battery?? What radio are you using?? What color is the led when it turns solid?? and what beeps is it making?
 
one of my buddies d/r was doing the same thing don't ask me why but we changed the spark plug problem fixed. wouldn't take much to see if that works for you.
 
When I added a killer b, my servo's went crazy, twitching...

I found moving the killer be away from the rx helped.

But then went with a ngk plug and it went away.

I don't think the stock plug is a resistor plug, the ngk is.
 
as i was switching out my plug to a ngk i noticed that the stock plugs tip was loose. the small medal nipple at the top. i didnt even know that could thread on and off haha but i still changed it anyways. so that could have been the culprit... ill let you know if i still have the problem after i run it
 
Back
Top