KrashKrieg's 7075rc Bloody Blackcat

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Hey guys can someone help me, I have xt when I start the car the car will run for 1minute with full throttle and die and the spark plug die to
 
You asked this same question several other places!!!

?? This is an electric thread about MY XBe build, why would you ask that here??
 
Last edited by a moderator:
camilio.salamandar said:
Let us know how you made Dgi steering links and 7075 diff housing play together
Click to expand...
Sure thing, just took pics, I'll get them up later...it's pretty simple...
 
Ok, So here's what I did for the DGI upper links

I used an old MT hinge pin cut down

(it's fully cylindrical and doesn't have center part thinner like the stock X series ones)

Then cut down and acid brush tube to size to keep it from sliding back/ forth

OlFart said he will be creating a top plate at some point.

I'll be talking to him about creating an AL insert like the black pin holders,

but has a threaded hole in the middle instead slide in pin inset.

Then with a small spacer / washer/bolt it will remove the need for the other pin side on the top plate.

(I realized the nut was loose and tightened it before I ran...lol)



Next was the front sway bar and steering links.

The stock links have a bend in them so DGI links were almost touching the sway bar mounts.

My simple solution was to add another sway bar clamp (from spares box).

This brought the bar out enough that it won't rub.





The whole front end

 
Last edited by a moderator:
I've got to say you save me time! that's coming out so sweet that I wouldn't even think of posting any pics of mine.
 
Silent_chaos said:
Nice job on the red. Are those front tires? Any problem with the grip?
Click to expand...
Thanks, red is powder coat on metal parts..

Yes, 5b fronts, grip is great in the grass, almost like MXTs.
 
rampage idiot said:
Awesome!! man you went all out on this one! Nice job!
Click to expand...
Thanks rampage idiot

Well I have been able to run about 6 packs through this build at my "bash and trash" spot

After several very violent downhill cartwheels ....

the verdict is this 7075rc build is rock solid!!! I even cartwheeled into the parking lot once and landed on lid.

Problems were non 7075rc related...

During a foward tumble, I yanked off my TBR bumper so I'm gonig to send a pic and hope they warranty it.

Other problem is the damn wing and mount...I'm going to try and make some carbon fiber brace plates to attach to mount, similiar to the ones BigFol did on here a while ago.

Maybe someone can chime in on the most durable plastic wing out there?

Photos of some fun ....can u say divit?...lol





Ran into a drain area filled with leaves.... :eek:

 
Back
Top