Large Scale bearing dimensions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Stegy

Stegy

Well-Known Member
Messages
159
Reaction score
0
Location
Zagreb, Croatia
Hi,

I'm trying to find some bearing dimensions of few large scale manufacturers/models.

So, if you have one of these cars and know exact bearing dimensions used, please write them here.


I have all dimensions for FG and RS5, but I need from:

1. H.A.R.M. - SX3/BX2....etc.
2. Lauterbacher SuperSprint, SuperCross, Megacross...
3. Genius - ....
4. Carson...
5. MCD all models...
6. HPI Baja 5B...
7. Some other you have/or know exact dimensions.

Please write them like this for example:

RS5 F1 new type:

1. 8x22x7 - 8 pcs - wheels
2. 10x22x6 - 2 pcs - clutch bell
3. 10x19x7 - 2 pcs - central shaft
4. 5x11x4 - 4 pcs - pushrod bellcrank
5. 10x22x6 flange - 4pcs - central gears
6. 15x24x7 - 2pcs - differential


P.S. Admin could make this topic sticky, it's good to know what bearings you need, what dimensions and quantity. :idea:
 
FG Modellsport

1. FG Marder, Marder Race, Monster Truck, Stadium Truck, Jeep, Hummer, Baja 2WD
1. 8x22x7 - 8pcs - uprights
2. 10x22x6 - 2pcs - clutch
3. 10x19x7 - 2pcs - central shaft
4. 12x28x8 - 2pcs - differential (plastic housing)

2. FG Leopard, Competition Monster/Stadium Truck
1. 8x22x7 - 8pcs - uprights
2. 10x22x6 - 2pcs - clutch
3. 10x19x7 - 2pcs - central shaft
4. 15x28x7 - 2pcs - differential (alloy housing)

3. FG Sportsline
1. 8x22x7 - 8pcs - uprights
2. 10x22x6 - 2pcs - clutch
3. 10x19x7 - 2pcs - central shaft
4. 15x28x7 - 2pcs - differential (alloy housing)

4. FG Competition, EVO 04-08
1. 8x22x7 - 8pcs - uprights
2. 10x22x6 - 2pcs - clutch
3. 10x19x7 - 2pcs - central shaft
4. 15x28x7 - 2pcs - differential (alloy housing)
5. 7x11x3 - 1pcs - alloy servo-saver
6. 7x14x5 - 2pcs - alloy servo-saver

5. FG F1 Sportsline
1. 8x22x7 - 8pcs - uprights
2. 8x16x5 - 2pcs - clutch
3. 10x19x7 - 2pcs - central shaft
4. 15x28x7 - 2pcs - differential alloy housing

6. FG F1 Competition (belt drive)
1. 8x22x7 - 8pcs - uprights
2. 10x22x6 - 2pcs - clutch
3. 10x19x7 - 2pcs - central shaft
4. 15x28x7 - 2pcs - differential (alloy housing)
5. 7x11x3 - 1pcs - alloy servo-saver
6. 7x14x5 - 2pcs - alloy servo-saver
7. 7x11x3 - 8pcs - pushrod rocker
8. 8x16x5 - 4pcs - rear belt tensioner
9. 8x22x7 - 3pcs - front belt tensioner

7. FG F1 Competition 08-09 (gear drive)
1. 8x22x7 - 8pcs - uprights
2. 10x22x6 - 2pcs - clutch
3. 10x19x7 - 2pcs - central shaft
4. 15x28x7 - 2pcs - differential (alloy housing)
5. 8x16x5 - 4pcs - central gears 38 teeth
6. 7x11x3 - 1pcs - alloy servo-saver
7. 7x14x5 - 2pcs - alloy servo-saver
8. 7x11x3 - 8pcs - pushrod rocker
 
RS5 Modelsport

1. RS5 Formula 1 (old type central gears with e-clip)
1. 8x22x7 - 8pcs - uprights
2. 8x16x5 - 4pcs - central gears 33teeth with e-clip
3. 10x22x6 - 2pcs - clutch
4. 10x19x7 - 2pcs - central shaft
5. 15x24x7 - 2pcs - differential
6. 5x11x4 - 4pcs - pushrod rocker

2. RS5 Formula 1(new type gears with locknut)
1. 8x22x7 - 8pcs - uprights
2. 10x22x6 with flange - 4pcs - central gears with locknut (outer diameter of flange 25mm, flange thickness 1.5mm)
3. 10x22x6 - 2pcs - clutch
4. 10x19x7 - 2pcs - central shaft
5. 15x24x7 - 2pcs - differential
6. 5x11x4 - 4pcs - pushrod rocker

3. RS5 TC CR-008
1. 8x22x7 - 6pcs - uprights
2. 17x26x5 - 2pcs - rear uprights inner bearing
3. 10x22x6 - 2pcs - clutch
4. 10x19x7 - 2pcs - central shaft
5. 15x24x7 - 2pcs - differential
 
H.A.R.M. Racing

1. HARM TC SX-3
1. 8x16x5 - 8pcs - uprights
2. 10x22x6 - 2pcs - clutch
3. 10x19x7 - 2pcs - central shaft
4. 15x28x7 - 2pcs - differential


Lauterbacher Modelltechnik

1. Lauterbacher TC Super Sprint
1. 8x16x5 - 8pcs - uprights
2. 10x22x6 - 4pcs - clutch and central shaft
3. 15x28x7 - 2pcs - differential
 
Back
Top