rcpauly
Member
- Messages
- 7
- Location
- Ellenville, New York
Hey guys anybody running lipo for receiver? What size do I need and do I need a voltage stepdown?
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Lipo
- Thread starter rcpauly
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
chitown joe
Well-Known Member
- Messages
- 630
i run losi 2s, 3300mh for my receivers and lighting,but i don't use any step down since my servos and electrics are all high voltage for 7.4v
if you running 6v servo's you need a voltage step down from 7.4 to 6v, you can find a regulator for those almost anywhere you see lipo's being sold
if you running 6v servo's you need a voltage step down from 7.4 to 6v, you can find a regulator for those almost anywhere you see lipo's being sold
rcpauly
Member
- Messages
- 7
- Location
- Ellenville, New York
- Thread starter
- #3
i run losi 2s, 3300mh for my receivers and lighting,but i don't use any step down since my servos and electrics are all high voltage for 7.4v
if you running 6v servo's you need a voltage step down from 7.4 to 6v, you can find a regulator for those almost anywhere you see lipo's being sold
Thats great thank you very much
Mike1970
Well-Known Member
- Messages
- 2,282
- Location
- Manchester UK
I know very little about lipo other than they're very popular amongst racers of most scales. I believe for some race series they need to be the hard case version and you'll need a charging sack to be safe.