loss of traction

[al240]

Hi guys, any idea why I have lost traction to my rear wheels? All screws seem tight. Is there anything I should look at in the rear diff? Any suggestions would be appreciated.

 

[chapinb]

Need more details.

Do the rear tires provide power? Any off sounds? Does the other wheel turn if you hold one? The front operates normally? With motor off, is there any resistance pushing the car or spinning the rear tires in opposit directions?

 

[BertR]

Lock up the breaks and push the car with the front lifted off the ground....if the rear rolls its a drive cup from center back! If it rolls with a clunck grind noise its the drive pinion in the rear diff housing that has gone to poo.

 

[al240]

Hi guys, so this is what I tried. I locked up the breaks, lifted the front and the back wheels draged across the floor. Placed it wheeks off the ground, put break on turned one wheel and the other turned opposite direction.When I turn a back wheel with the break off front wheels turn, but opposite back wheel is still.

When I turn a back wheel there is not much resistance.

 

[Phill2]

Sound like a drive cup

They usually break at the pin hole inside the diff

 

[al240]

So, what next? Do I take the diff appart and have a look to see what is happening in side?

 

[Deluge1]

Yes, pull the diff out and inspect it. It could be a snapped pin or the diff cup itself snapped.

 

[Phill2]

So, what next? Do I take the diff appart and have a look to see what is happening in side?

That's what I would do