Lowered MT Body

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
S

skater229

Well-Known Member
Messages
144
Reaction score
0
Location
Guantanamo Bay Cuba
I lowered the front by 2 holes in the body mounts, and the rear by 1... I think the trucks looks a little better... what do you think???


attachment.php
Before lowering...


attachment.php
After lowering...


attachment.php
Rear Bumper Mod...


attachment.php
Body Mod front end...
 
RampageHopUps said:
Cool look on the body. I have the same stand as you, and I love it.
Click to expand...
Not sure if you saw or not, but i wacked the bars off the rear bumper... Didn't think it needed to have a full one back there and it was also hitting the lowered body...I like the stand also, but need to put a bolt to keep it from tilting... It just move a little but at time it is too much...
attachment.php
SkaterRearBumperMod.webp

/monthly_2008_08/RearBumperMod.JPG.64767554295f040514f38d71c3a40e3b.JPG
 
Last edited by a moderator:
I lowered mine also. You can't lower the rear as far as the front because it hits the stock muffler.


I cut some of the body off in the rear, below the "tail gate" area.
 
Kaz the Minotaur said:
I lowered mine also. You can't lower the rear as far as the front because it hits the stock muffler.
I cut some of the body off in the rear, below the "tail gate" area.
Click to expand...
You see the X-Can peeking thru the bed right? another thing that keeps the rear from going down any lower is the roll cage...


Skater
 
Skater229 said:
Flip-top work table
There you go...
Click to expand...
I have one of those too. I put wheels on the bottom so I could rotate it easily without having to pick it up and turn it around.


If you want a really cool stand look at the Ram mounts and figure out a way to hook this up. You have circular adjustability and up and down also so you can jack the front or back up or down for easy access.


http://www.ram-mount.com/ramwebcompthumb/Page.html
 
MOfroggy said:
Skater229,
The rear end of my my body is "caving in" like yours is. I wonder if this is a common problem with others too?
Click to expand...
Mine is from when it was shipped, the rear of the body was stuck on the tail pipe... Going to find something light but strong and shoe-goo it in place... Should also make it a little stronger...


Skater
 
MOfroggy said:
I have one of those too. I put wheels on the bottom so I could rotate it easily without having to pick it up and turn it around.
If you want a really cool stand look at the Ram mounts and figure out a way to hook this up. You have circular adjustability and up and down also so you can jack the front or back up or down for easy access.


http://www.ram-mount.com/ramwebcompthumb/Page.html
Click to expand...
I like the wheel idea... Where did you steal the wheels from?


Skater
 
Back
Top