oliver88
Well-Known Member
Hi all been trying to sell my mcd on eBay but as you all know it's full of dreams and time wasters.
First off is my oddie 26cc redtop heli engine, dated 07/07/09, the guy I bought it off used it as a spare and has only run 3 gallon through it. He had it serviced by Ian and also I new ring put on. When I got it the fan cover was damaged ( 2 lobes for the bolts had broke off) so I bought a new fan cover but it will need holes drilling for the coil or get a new one off Ian. The pullstart isn't the best in my opinion but seems to work ok. It comes with an oddie clutch which has a harm back plate which can be changed for any brand of model. Has spare clutch plates with it, also comes with new switch and coil lead. £245 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Spektrum dx3s with sr300, in good condition, also had the roller pin modded to a stronger one to prevent it breaking. £75 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Mcd mielke pipe like new apart from little mark as shown in the pic £85 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Fully working 1/4 scale jack with 4 axle stands, fantastic quality works great with 5th scale cars £45 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
A propeak prodigy 2 charge, comes with lipo balancer, charges all batteries, very good condition £30 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
A makita lion impact driver, great for working on your cars, comes in original case with instructions, also comes with 2 batteries and charger £50 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Rhino Digi servo tested and works ok, the nut that holds the servo horn on is rounded but never caused me a problem, could proberly remove with pliers SOLD
Resized to 88% (was 768 x 1024) - Click image to enlarge
Mcd sport 2008 rolling chassis, has had a few upgrades, v4 side pods and tank ( new ) bearings replaced, diff housings replaced, arms and rod ends replaced, shocks rebuilt. Comes with Elcon wheels and also standard red wheels. Has 3 as new hitec 5745mg servos, new volt meter, also comes with a v4 shell which is in great condition £380 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 66% (was 1024 x 768) - Click image to enlarge
Resized to 66% (was 1024 x 768) - Click image to enlarge
Thanks for looking, all payments made via paypal, you cover fees! Any questions please ask.
First off is my oddie 26cc redtop heli engine, dated 07/07/09, the guy I bought it off used it as a spare and has only run 3 gallon through it. He had it serviced by Ian and also I new ring put on. When I got it the fan cover was damaged ( 2 lobes for the bolts had broke off) so I bought a new fan cover but it will need holes drilling for the coil or get a new one off Ian. The pullstart isn't the best in my opinion but seems to work ok. It comes with an oddie clutch which has a harm back plate which can be changed for any brand of model. Has spare clutch plates with it, also comes with new switch and coil lead. £245 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Spektrum dx3s with sr300, in good condition, also had the roller pin modded to a stronger one to prevent it breaking. £75 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Mcd mielke pipe like new apart from little mark as shown in the pic £85 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Fully working 1/4 scale jack with 4 axle stands, fantastic quality works great with 5th scale cars £45 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
A propeak prodigy 2 charge, comes with lipo balancer, charges all batteries, very good condition £30 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
A makita lion impact driver, great for working on your cars, comes in original case with instructions, also comes with 2 batteries and charger £50 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Rhino Digi servo tested and works ok, the nut that holds the servo horn on is rounded but never caused me a problem, could proberly remove with pliers SOLD
Resized to 88% (was 768 x 1024) - Click image to enlarge
Mcd sport 2008 rolling chassis, has had a few upgrades, v4 side pods and tank ( new ) bearings replaced, diff housings replaced, arms and rod ends replaced, shocks rebuilt. Comes with Elcon wheels and also standard red wheels. Has 3 as new hitec 5745mg servos, new volt meter, also comes with a v4 shell which is in great condition £380 posted
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 88% (was 768 x 1024) - Click image to enlarge
Resized to 66% (was 1024 x 768) - Click image to enlarge
Resized to 66% (was 1024 x 768) - Click image to enlarge
Thanks for looking, all payments made via paypal, you cover fees! Any questions please ask.
Last edited: