moo vid trying to kill diff cups

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
mooman007uk

mooman007uk

Well-Known Member
Messages
1,721
Reaction score
5
Location
Errington, VANCOUVER ISLAND, BC
despite a good thrashing diff cups held up, 2 rear tempered, one front dremelled and one upgraded with no treatment. Managed to strip 27/33 MCD gears though..how i don't know but it shows I was trying. Desert rat body is tough, just a few creases and a lilttle hole, exhaust came loose and burnt out a gasket...I knew something weren't right when it wouldn't hit the pipe doing a donut. stinger came off again despite flanging it like pipeous suggested...that worked but the rubber split...you can also tell when that came off...with the stinger the response is instant...just hits the pipe straight away. anyhow here's the vid...wife took it and is crap...she wont move and is too slow bless her...outta 12mins vid I got 5, tomorrow my neighbour will take some..he is way better


http://s729.photobucket.com/albums/ww294/mooman007uk/?action=view&current=rampcuptest_mpeg2video.flv...more than 5mins so I'll have to post the rest tomorrow


gears , body post and body damage


DSC00373.webp


DSC00374.webp


DSC00379.webp


DSC00375.webp
 
Last edited by a moderator:
that was a pretty swell beating. does that shell make the rampage look bigger? you damn near almost mowed your self down!! my wifey hated doing vids too, so this is what i use. you can buy the mount at walmart. its in the camera section and just double side tape it to the top of the radio.it has a screw for the tripod mount

tt truggy 011.webp

/monthly_2009_03/583c6056f0555_tttruggy011.jpg.c5d509a7789e0d7414aec613295e8dc0.jpg
 
This is what I did for the pipe and a pic of stock gears.....yeah, they're still going! Notice my fuel line protector and broken pipe mount!

Ramppipe 007.webp

Ramppipe 006.webp

Ramppipe 009.webp

/monthly_2009_03/583c6056f2269_Ramppipe007.jpg.0c46cc739651cba2e1704cc31edab185.jpg

/monthly_2009_03/583c6056f3e64_Ramppipe006.jpg.a1ad288d0e6715830145a67febca152f.jpg

/monthly_2009_03/583c60570199a_Ramppipe009.jpg.7d0b8022b38d8acf7c0a8562a7f9a1b1.jpg
 
Last edited by a moderator:
Here's the second part.


what you using for the stinger there piranha?


I'm still mystified as to why those MCD gears got toasted, I don't remember anything bad happening that wasn't caught on video....gas jockey to the rescue...again..I'll throw on the 25/35 til more gears arrive.


http://s729.photobucket.com/albums/ww294/mooman007uk/?action=view&current=diffcup2.flv


kryp I don't think the mount will work for my vid cam, bit on the big side, though my regular camera has a decent movie mode and will be less of a brick


DSC00384.webp
 
Moo, I got it from Venom Group International (speedbaboon told me about it, Thanks) I got the 1:8 ones but it goes down the pipe pretty far. Oh just search "exhaust" on their site, I think they're in Oregon so shipping might not be $12 like mine was for a $3 part...at least you get 2.


Aww, crap.....almost forgot again...great vid...you got to tell the guy driving to be careful around you!
 
Last edited by a moderator:
Piranha2 said:
Moo, I got it from Venom Group International (speedbaboon told me about it, Thanks) I got the 1:8 ones but it goes down the pipe pretty far. Oh just search "exhaust" on their site, I think they're in Oregon so shipping might not be $12 like mine was for a $3 part...at least you get 2.
Aww, crap.....almost forgot again...great vid...you got to tell the guy driving to be careful around you!
Click to expand...
I'll order some today, i'll need 2 one for mt and tt.


It's the second time I've tried to run myself over:rolleyes:
 
Back
Top