motor idling issues

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
D

Drews Custom Arts

Member
Messages
42
Reaction score
1
I have the mt version 3 with the 30cc. I am having troubles with the idling and the running at times. It runs ok but it wont idle very well at all. Most of the time it stalls wen i let off the throttle to stop or idle. If you mite know the stock carb settings im sure i could work from there. Tech support isnt oppen on weekends so I cant call them rite now. I have a pipe on it nothing special its only like an 80 or 90 daller pipe. Just something to help with the takeoff.


For the most part I love the truck it goes awsome and has greatv takeoff considering what ive been told about it. It spins awsome on takeoff with the way I have it set up rite now. Just the prob with the idle mainly.


Please any help wioll be appreciated.
 
Check for an air leak.Make shure your carberator bolts are tight.Check that your manifold is not warped. The plastic ones tend to warp.Check that your carberator breather is not cloged. The carberator breather is located on the front of your carberator it`s a very little hole,daves discount sells a filter for it. Part #av493 or you can make your own and save a few bucks. I made my own out of a little piece of brass and some foam.Hope this helps.
 
Thanks for the settings I reset the carb changed the plug and with very little tweaking it runs like a brand new truck off the factory line . Absolutly love this truck first fith scale ive owned and definatly not dissapointed at allll
 
Back
Top